V3.071 BUG REPORT
Most recent update: June 2023 LATEST UPDATE V3.071....... WHAT´S NEW?
| VERSION CONFIRMED | ISSUE | STATUS/ADVICE | UPDATE PENDING | RESOLVED |
| v3.07 | The object Toilet Drawer is loading with the Toilet element missing | Add a toilet from the Furniture Library and insert in the drawer element | Non-critical |
Update to v3.071 |
| v3.07 | If the software can not detect the system information required, it defaults to loading in true full screen with a blurry resolution. Other symptoms may be lagging and freezing |
Take out of true full screen and place in windowed mode. Software loading with Blurry resolution |
Pending |
Update to v3.071 |
| v3.07 | When placing certain objects in template FO TR L2H2, they are anchoring below floor level. | This is not occurring in all templates, so moving the object into position with the Move Gizmo is the short-term resolution. | Pending |
Update to v3.071 |
| v3.071 | When applying rotation via the Object Control panel, Axis X & Z are not updating correctly in Resize & Rotate input boxes. | Confirmed and investigating | Pending | |
| v3.071 | Initial object dimensions include decimal figures. | This accurately represents their size in the software and can be manually adjusted by the user. | Non-critical | |
| v3.071 | Object Front Cab Bench Double is being replaced with the Triple version after saving and reloading. | Avoid using the Double and duplicate the Single instead | Non-critical | |
| v3.071 | The wheelbase figure hides once a custom template has been saved and re-opened in the design area. | If axles are in an incorrect position, place internal wheel wells from the Furniture Library in the correct internal position. | Pending | |
| v3.071 | When selected in the custom area, the Metric/Imperial setting is not being applied in the main design area. | Go to Settings to make the selection; this will then apply in both design and custom areas. Selecting Metric or Imperial Measurements |
Pending | |
| v3.071 | The pre-made template PE PA L2 does not allow objects to be placed within the design area. | Use the PE PA L1 template and adjust the dimensions of the template. Changing the Dimensions of a Pre-Made Template |
Pending |
Comments
0 comments
Article is closed for comments.